In Stock
Lacerate FET Boost is a mini booster pedal with 2 boost modes: Clean mode and Crank mode. In Clean mode, pedal boosts the signal and increases the volume without any sound colorization. It's like a mirror image of your tone. If you want fat, harmonically rich boost, just hold on the footswitch at least 1 second to engage 2nd stage with overdriven tone. When you need to boost your volume in original tone for playing a solo part, you can simply activate the pedal and it will increase the signal volume in adjusted volume level. If you hold the footswitch at least 1 second, signal will be cranked up. You can use it before any drive/overdrive pedal in your signal chain as a Clean Boost. And you can try in different chain combinations for different taste. There is another way to use Lacerate FET Boost pedal, you can adjust the output level the same as orignal input level or below. You can also get the cranked tone in original volume or lower volume. That also allows you to control some frequencies, Lacerate FET Boost is compatible to use to highlight some frequencies. Especially you can try crack mode and different volume combinations to check the frequency changes.
Features:
True Bypass / Buffered Tail (Cause of inside power doubing, Nux's buffer could offer double dynamic range than others!)
2 Boost functions (Clean Boost-Crank)
Dual FET for the most tube like tone in a transistor design
9V center negative DC supply, 75mA current draw
- reverb_offers:
- off